Mile High Top Sites ®™

Solar energy is all around us, but most people don’t notice it. For instance, the power source for many emergency phones on freeways is powered by it. This brings us the subject of solar post lights.

Solar Power for Post Lighting

Solar energy started to come into popularity in the 1970s, when technology advances combined with massive oil price increases to make solar a popular alternative energy source.

Will You Switch Your Home To Solar and Wind Power In The Future?

• Yes
• No
• Need More Information
• Solar and Wind Power Cost To Much
• Not Sure

View Results

 Loading ...

Back then, the world was just starting to become more aware about the risks of using so many non-renewable resources, and people wanted to decrease their dependence on fossil fuels.

Now, solar power is being used by many different people all across the world, both in big and small ways. One of the small, but still important ways it is being used is in solar post lights.

Often, people want to light their driveways or backyards. Aside from running expensive extension cords to lamps, using battery after battery, or running lines in underground pipes, there really weren’t many choices to power their lamps. Now, solar post lights are regularly used by those who want the convenience of not having to change batteries, and those who want to save money on their electric bill.

Solar post lights work by using very small solar panels, which are attached to an energy collector. These solar panels stay out in the sun all day, attached to your post, and they soak up all of the sun’s solar energy.

The energy collector in many of the solar post lights is a NiCad rechargeable battery, most of which can go up to 1000 charges! That is about three years. The light that is powered by the battery is an LED light, which takes very little power but emits a bright light. LEDs can last up to 25 years, making solar post lights a very economical investment. These lights will emit their soft glow for many hours during the night, depending on the amount of solar energy they received during the day.

Other advantages to solar lights are that there are no wires needed, so installation is very easy. Also, you can often buy the lights individually, so there is no need to buy a large package of the lights if you only need a few to illuminate your way. Each light runs independent of the others, so if one light malfunctions, the rest will still be there and glowing.

Whether you choose to buy a few or a lot of the solar post lights, they are still the most economical and ecology minded choice for your driveway and fence lighting needs. With a long lifespan and easy installation, these lamps are the perfect thing to shine through the dark of your front yard. For more information on The Green Buzz Power, Go Green For Power!

Motion lighting is very convenient security platform for homes. Solar motion lamps take the benefits to the next level with more efficiency and reduced utility bills.

Motion Lighting Using Solar Power

Motion sensor lamps can be an excellent choice for your home. These lamps offer the security of having a bright light shine into the eyes of any would be intruder, thus deterring them from staying on your property. There are several different types of motion lamps available for the protection of your family and home, but the best option by far is to use solar motion lamps.

Solar power is a clean and ecologically sound alternative to electric, battery and other sources of power. There is no pollution produced, no non-renewable resources used, and it costs far less than other power sources. Even if you don’t choose to use solar power for all your household needs, you can still help the environment by choosing solar motion lamps. Every small bit of solar power used decreases the world’s usage of less ecological methods.

Solar motion lamps work by collecting solar power during the day through solar cells located on the light. This solar energy is used to recharge a battery (usually a NiCad rechargeable battery), which in turn powers the lamp at night. Some models of solar motion lamps include solar panels that are strong enough to collect energy even in overcast conditions, making the lamp even more useful. Motion lamps also have settings to customize.

You can set the duration that the lamp shines when it detects motion (any where from .5 minute to three minutes), as well as being able to position it so that it can detect motion up to 90 feet away. The trigger for the motion lamp is a passive infrared motion detector that is safe for use around all people and animals, and does not require additional high tech equipment. You also have the choice of mounting your solar motion lamps on a post (this will be provided) or on the side of your house or garage.

Solar motion lamps usually use a strong LED lamp. LEDs are an excellent choice for solar lamps because they use far less power than traditional bulbs and halogen lamps. Motion lamps are built with weather resistant materials, so they can be left on your homes exterior in all types of conditions.

Will You Switch Your Home To Solar and Wind Power In The Future?

• Yes
• No
• Need More Information
• Solar and Wind Power Cost To Much
• Not Sure

View Results

 Loading ...

Solar motion lamps are an excellent way to keep your home and property safe from intruders and other problems, all while being cheaper and more “green” than other choices. If you need just one or many, the solar powered versions of motion lamps are the easiest choice for your lighting needs. For more information on The Green Buzz Power, Go Green For Power!

From the first time I saw, first hand, a solar cell making electricity, I was hooked. It was magnetic. I was going to have one, making electricity for me, one day. I didn’t get around to trying it, until about 1979. I ordered $400.00 worth of solar cells from a company in California. I made a makeshift solar panel with them, which worked for a while.

Much later, in 1993, I tracked down a company in Calgary, who sold solar panels. I bought 1 for about $500.00. It was about the size of a large beach towel. It was blue in color and was mounted inside an aluminium frame.

My first attempt at making a solar power lighting system worked but wasn’t very efficient. I used a little incandescent bulb from a reading lamp hooked up to a car battery, that was charged by the solar panel.

I mounted the solar panel in the most sunny window I had to put it in. At that time there weren’t compact florescent light bulbs. I liked that solar panel so much that I bought 3 more like it from the same company. Each panel made about 50 watts in direct sunlight.

A solar cell reacts with sunlight making a positive and negative charge. When you link the two charges by attaching a wire to both ends of the solar cell, charged electrons move along the wire, and an electric current flows. When the cells are joined together, to increase the voltage and amperage, you have made a solar panel. So all this makes the electricity your light uses.

Will You Switch Your Home To Solar and Wind Power In The Future?

• Yes
• No
• Need More Information
• Solar and Wind Power Cost To Much
• Not Sure

View Results

 Loading ...

Once you have the electricity, you have to store it somewhere, or use it right away. Since the whole point of a light is to use it in the dark, and solar panels only work in sunlight, you need a battery, to store the electricity until you are ready to turn the light on.

To keep the electricity in the battery while the solar panel is connected, a diode is used. A diode is an electronic device which only allows direct current to travel in one direction. If the current tries to go in the other direction, then the diode stops it. This happens when a big dark cloud moves in front of the sun. Your panel makes so little power the battery has more voltage push, than what is coming from the panel. So the voltage from the battery tries to send current out from the battery. We want the battery to charge, and not waste the electricity until we turn on the light.

To use the direct current electricity in a battery, to run an alternating current or household current compact florescent light, you need to convert the electricity from the battery, to the kind of electricity the light will use. This device is called an inverter. It makes AC electricity out of DC electricity. The inverter is connected to the battery and the power cord from the light is plugged into the inverter.

When you switch your light on, you are using the power from the sunlight captured during the day time. The advantage of using compact florescent light bulbs is that they are very energy efficient, using little electricity, and giving out the same amount of light used by a 60 watt regular light bulb. You make your own power and don’t care if the power from the electric company goes off.

Your lighting system will still work.For more information on The Green Buzz Power, Go Green For Power!